Network Hero Animation — Light
Use cases  /  Design

See every impact before a change lands.

Trace each requirement through the architecture to the BOM, and review proposed changes before they reach any connected tool.

A proposed change, start to finishExample eVTOL air taxi program
1Change proposed
2Impact traced
3Owner approves
4Visible everywhere
Requirements IBM DOORS Next
MBSE Cameo
PLM PTC Windchill
REQ-PWR-112Battery pack mass≤ 410 kg→≤ 395 kg
Battery PackSystem block, mass property410 kg→392 kg
BP-2200Battery assemblyRev C→Rev D
REQ-PWR-115Pack voltage, 800 V
Power DistributionSystem block
HV-0410High-voltage harness
Proposed change from the systems architectREQ-PWR-112: battery pack mass ≤ 410 kg → ≤ 395 kg
RejectAccept
The challenge

Changes break things nobody can see.

Requirements, architecture, and parts live in separate tools, so a single change can quietly break links across all three.

01Siloed tools.Requirements, models, and BOMs each live in their own tool, so no one sees the full chain from need to part.
02Silent breakage.A requirement edit can break the architecture or BOM downstream, and nobody finds out until review.
03Uncontrolled updates.Without a review step, one team’s change lands in another team’s tool before anyone agrees to it.
How it works

Every change is reviewed before it spreads.

Proposed changes wait for the owner’s approval, then publish to every connected tool at once.

01Trace the chain.Requirements link to the blocks that satisfy them and the parts that realize them.
02Propose a change.Engineers propose edits in their own tool, like tightening a mass budget.
03See the impact.The thread shows every block, part, and requirement a change touches.
04Owner approves.The item owner accepts or rejects it, and accepted changes publish everywhere.
Typical toolchain

Built on the tools your engineers already use.

Each team keeps working in its own tool while the thread keeps requirements, models, and parts linked.

  • RequirementsIBM DOORS
  • RequirementsIBM DOORS Next
  • RequirementsJama Connect
  • MBSECameo Systems Modeler
  • MBSEIBM Rhapsody
  • PLMPTC Windchill
  • PLMSiemens Teamcenter
  • PLMAras Innovator

Based on the ISO/IEC/IEEE 15288 design definition process. The example uses the eVTOL air taxi demo program, and values are illustrative.

See the impact of your next change.

We’ll connect your requirements, models, and parts and trace a real change end to end.

Get Started

Product Use Cases

Accelerate Your Engineering Workflow with SBE Vision

SBE Vision unifies the engineering ecosystem by establishing a defined, interoperable digital thread across tools, teams, and data. Regardless of your systems development process, whether ISO 15288, the V-model, or a customized enterprise framework, SBE integrates seamlessly without disruption. From concept of operations through design, verification, production, and sustainment, SBE Vision ensures authoritative traceability and reliable data flow.

Digital threads span far beyond a single workflow. There are more than one hundred distinct use cases across engineering execution, compliance, program management, supplier coordination, change management, and lifecycle sustainment. The examples below represent only a starting point for what SBE Vision enables.

Engineer testing equipment

Explore a few use cases that showcase our platform in action. These are just a starting point for what we can support.

Design Verification

Purpose:

Synchronize system architecture, product design, and simulation validation through an integrated, traceable engineering environment.

Overview:

This use case connects MBSE, CAD, and Simulation tools to create a dynamic, feedback-rich environment where updates flow bi-directionally, enabling real-time impact analysis and parallel workflows.

Key Capabilities:

  • Parallel Development: MBSE, CAD, and Simulation teams work independently but remain continuously connected.
  • Dynamic Feedback Loop: Design changes auto-trigger simulation recalculations; architectural shifts inform design and performance metrics.
  • Faster Iteration & Validation: Changes propagate across tools instantly, minimizing rework and enabling faster cycles.
  • Impact Analysis: Full traceability enables systemic visibility into how each change affects upstream and downstream artifacts.

Requirements Satisfaction

Purpose:

Achieve comprehensive traceability of requirements from concept to product structure (BOM), enabling change propagation and collaborative design validation.

Overview:

This use case integrates RMS, MBSE, and a PLM system. It supports seamless requirement decomposition, architectural traceability, and downstream realization alignment.

Key Capabilities:

  • Top-Down Requirements Traceability: High-level requirements authored in RMS are linked to lower-level requirements in MBSE and visible downstream in PLM.
  • Cross-Domain Design Justification: Requirements are mapped to architectural components, validating satisfaction and enabling collaborative engineering.
  • Change Propagation: Iterative updates trigger proposed changes across tools, maintaining synchronization while enabling review workflows.

Stakeholder Needs Definition

Purpose:

Enable full traceability and stakeholder visibility throughout the engineering lifecycle, from initial requirements through real-time analytics.

Overview:

This use case incorporates the use of an ALM tool, a RMS tool, and Data Visualization. By linking engineering artifacts and surfacing insights via AI-powered dashboards, teams gain comprehensive visibility into project progress, risks, and optimization opportunities.

Key Capabilities:

  • End-to-End Traceability: Connects requirements, designs, tests, and milestones across ALM and RMS to support compliance and informed decisions.
  • Real-Time Dashboards: Data aggregation into a visualization layer exposes status, dependencies, and bottlenecks clearly.
  • AI-Powered Insights: Advanced models identify hidden risks and trends even in systems lacking full link structures, enhancing early decision-making.

System Architecture Definition

Purpose:

Enable agile, traceable system architecture development with real-time simulation validation and requirements alignment.

Overview:

This use case brings together MBSE, RMS, and Simulation tools to define and validate system architecture. Changes to architecture or simulation results drive informed updates across the lifecycle, enhancing accuracy and minimizing delays.

Key Capabilities:

  • Independent but Interoperable Workflows: Each tool evolves independently while remaining synchronized through interoperable data.
  • Real-Time Validation: Simulations adjust dynamically based on architectural inputs, ensuring continuous design-validation loops.
  • Traceable Design Decisions: Every update is recorded and traceable, ensuring context for all changes and supporting "shift left" practices.